I try to stop posting about Kayfun clones, but I can’t help myself. With an even longer name than before the Kayfun has been enhanced once again. This new version is a variation of the Kayfun Lite Plus v2, but now there are 2 AFC’s to allow an even airier draw than before. I can see a ton of ways this can improve the latest Kayfun and I will be looking into getting one of these for myself.
There’s no way to show the dual air intakes in one image, but you can see the control screws here.
This version of the Kayfun Lite Plus looks like it has the classic top cap, and not the nano design that has been making the rounds. I always tried to get a proper dual coil in my Kayfuns, but it never really had the air/juice flow to accommodate the lower sub ohm coils. From the looks of the deck this version should have enough air flow despite the regular looking 510 pin. With sufficient air flow the last concern would be the wicking. When I first saw this listing I was hoping to see 4 juice channels at the deck, but this has the standard 2 channel layout. That does not mean dual coils are impossible, all you have to do is put a one sided wick into each well.
The only picture of the deck I could find
One of the vapers I was chatting with ran into a very interesting problem with a KFL+ that I wanted to point out. This involved a KFL+ and a Stingray. The AFC screw from the KFL+ was very loose when it was threaded onto the mod. The screw somehow loosened further at one point and locked the RBA onto the mod. So take a fair warning and either keep the AFC screw considerably recessed into the RBA or remove it, especially if the mod has a crown.
Don’t forget to use coupon code “reddit10” to bring the price to $40.50.
Get yours here http://www.eciggity.com/dual-airflow-kayfun-lite-plus-v2-clone-by-ehpro/
Things are definitely getting interesting. There are so many spin offs of the Kayfun clones that they are becoming difficult to track. Here we have the latest version of the Kayfun Lite Plus, but now in blue. Following the same path as the Nemesis tube clones, the Kayfun looks like it will become available in more and more colors. Performance wise this is considered to be the latest and greatest of Kayfun clones, and now it has a beautiful blue finish to add some variety to the mix.
EHPro is known for making the first, and the highest quality Kayfun clones
The names for these atomizers just keeps getting longer and longer. I remember when there was just the Kayfun, then there was lite, now we have a whole story to tell in just saying the name of an evolved RBA. To break it down, this is the Plus version of the Kayfun Lite, which means the air flow control is going to be on the bottom of the atomizer. Being the EHPro v2 Kayfun lite means this RBA has an enlarged air intake. I really want to get a v2 for myself, because I’ve grown to like a very airy draw, and if the draw is too airy, you can always dial it down with the AFC. Much like the Svoe Mesto KFL this RBA has the new drip tip, which has two o-rings for added stability. The 510 connector ping is also adjustable so users attempting to use this mod with a hybrid adapter will be very happy.
The deck is unpainted, just the way I’d prefer.
The price for the EHPro Kayfuns has always been a bit higher than the alternatives from the Chinese suppliers. EHPro doesn’t supply the Chinese sites, so it is unlikely to get a better price overseas. For your money you get all the main accessories. Nicely camouflaged in the back of the photo you can see the clear tanks both the section and the full M tank. Hopefully this is opening doors for the future when we can mix and match parts and everyone will have their own unique atomizer and RBA. Most importantly this version has red o-orings, which outperform black o-rings according to the league of professional grade cloud contestants. Please don’t sue me.
I got a few more details and a new lower price for this massive RBA. This is the first of many 28.5mm RBA’s we will see in the new future and it is very nice to see the price is the same as the 22mm counterpart. More suppliers are offering preorders for this atomizer, and I’d assume this is as low as the price will get from a U.S. vendor.
Big atomizers give big flavor
The estimated capacity for this atomizer has grown. I previously stated that it is around 8.5mm, this vendor says it is over 10ml. The clear tank is also included. It is not very descriptive but I would assume they mean the window section, and not a whole 1 piece clear tank. The drip tip is interchangeable with a standard o-ring design.
Without warning they are here! The Big Kayfun Lite Plus is now available for preorder and this is some big news. Currently in vaping the consensus has been made, bigger is better. In the past year we’ve seen bigger batteries, bigger air flow and now finally bigger Kayfuns. In the whole sense that more is better, 26650 mods have lately taken off and vapers everywhere have been enjoying longer battery life from their mods. Now they can cap it off with a flush fitting 28.5mm atomizer.
Making the Hades look smooth
Now the Kayfun Lite Plus has what I would consider more than a day’s capacity. The site lists this as holding 8-8.5ml. I have been hesitant of 26650 mods due to their size. I’m used to carrying around an 18650 mod, but the extra width of a 26650 mod has always put me off. Now we are seeing an expanding selection of 26650 mods, as well as 26650 atomizers, and I am now definitely interested.
No pics of the deck yet, but this looks to be a dead on enlarged clone
The Kayfun Lite Plus is the premiere Kayfun style atomizer. The latest rendition is still favorable to single coil builds. The airflow has been greatly improved since the original Kayfun. One concern I have is about the juice flow system. Can you really just make an atomizer bigger and have it perform the same?
Who other than Tobeco
Hopefully this is the start of the enlarging selection trend. I am a fan of flush fitting atomizers. It really makes a mod feel more solid and greatly improves the aesthetics of a mod. Maybe in the near future we will see more styles for this mod, maybe nanokits, or maybe a 26650 Aqua variation. With the direction things are going I wouldn’t be surprised. Clone manufacturers have really started blazing their own trail here and it is really improving selection.
Probably the most recommended rebuildable atomizer right now is the Kayfun Lite Plus. Here we have a second version of the clone complete with all the trimmings to make purchasing a Kayfun a breeze while allowing some variation in your tank design. The Kayfun Lite Plus has been expanding its product offerings vastly in the past few weeks and we’ve seen everything from gold, copper and black in variations of versions 1,2 and 3. Here is the standard old stainless steel edition with the improvements of the newer designs we’ve seen as of late.
The Nano kit alongside the full size, both included.
I keep telling myself that I have more Kayfuns than anyone could need, but one more wouldn’t kill me, right? The Kayfun design is famous for its ease of use, manageable design, and cool flavorful vape. This design has expanded the air flow hole and provided the newer drip tip design complete with dual o-rings for stability. I am a big fan of the recessed fill hole in the “Plus” versions of the Kayfun and it is not supposed to suffer from the Kayfun leak of previous models. My only visible complaint up front is that the deck screws might be a bit on the small side, but that can be easily remedied with some spare parts if you have any laying around. I expect there will be a stripped down version of this offer for less in the near future, but don’t be surprised if this one ends up backordered.
They couldn’t even fit it all in one picture!
Here is what the site says about it:
It is the updated version of the Kayfun Lite Plus
Standard 510 drip tip
Stainless steel 510 contact pin
Bottom screw fill-hole
With 1 air hole, 1 screw on the bottom to control the air flow
The Kayfun design is evolving. While many of the cloners have already been making multiple versions of the famous RBA, they have all been variations of the original. Now we have a new twist on the new Kayfun lite + clones.
These would nicely compliment colored Nemesis tubes.
I know there are many vapors out there looking for a brass colored Kayfun to match their handful of brass mods, gold plating might be close enough. The Kayfun lite + is considered by many to be one of, if not the best RBA’s available. There are all the old features of the Kayfun lite, but with a few minor changes to the design. The most noticeable of the changes is the recessed fill hole in the bottom. This should take care of the leaking issues some users were getting with the Kayfun Lite or the Russian. Also the air flow control screw has been placed on the underneath as well. Personally I would remove the screw all together since I prefer a more airy vape.
Nicely done EHPro
I think Eciggity should be mentioned for the way they run their site. The Eciggity site is one of the nicest in the industry. Some other vendors could learn a bit from them. Each product is clearly labeled with the maker’s name right in the title. There are numerous large photos for each product. Each product has its own unique description laid out by the staff, rather than just a copy of the Alibaba blurb. All of these site features take the mystery out of ordering vaping gear online and really helps consumers like me who don’t have a local B&M store. Keep it up!
I almost want both, decisions, decisions
Currently the black version is in stock, and the gold version is at a preorder. Both versions include the M tank, the clear short tank and the steel tank.
101vape gets a lot of mentions here. It is probably because they are usually the first U.S. store to get most products in, and they have really low prices. I just posted a preorder of this atomizer, but now you can get yours even faster.
A proper Kayfun Lite Plus clone
This Kayfun Lite Plus clone is made by Tobeco. I have very mixed feelings for Tobecco products. I’ve had some good and some bad experiences with their atomizers. The Kayfun Lite clone I ordered from overseas is absolute garbage. The Aqua atomizer is excellent, so you never really know what you are going to get from them.
Accommodates all drip tips
I have a small gripe about the product presentation at 101vape and that became apparent when my Aqua atomizer appeared to be missing parts. They will list a product for weeks without adding any details. In a way you are forced to buy products blindly from them. With this atomizer it is unclear whether or not you will get a clear tank section. The other vital piece of information is the materials used in the deck. Some Kayfun clones have been sold with chromed brass in the deck, and that is highly unfavorable.
On a positive note, this is a legit clone of the Kayfun Lite Plus. You can see the bottom of the atomizer with the two screw holes. The larger one is the improved and recessed fill hole. The other is the air flow control which is a new feature of the Plus. All in all the price is right, and if you have other Kayfuns lying around I’d bet money that you can use the tanks from those.