Tag Archives: hana

The Hana Mod Clone 18650 Version $56

I think this is the final form of the Hana clone. There have been minis, DNA20 versions, but now the clone hunters will get their DNA30 version. The main difference between this version and the previous ones to reach the Chinese suppliers is the interchangeable 18650 battery. A lot of vapers such as myself prefer to use their arsenal of batteries rather than being forced to use a built in pack. There are many reasons for this. The battery packs might have questionable compositions which have a possibility of being dangerous. Even though this version has an 18650 installed already, you can pop open the mod and use your own battery. Being able to swap the battery is also nice in a pinch if you don’t have time to charge a 2000mah battery at 500mah.

It shows 30 watts! Hopefully that battery can take it.

It shows 30 watts! Hopefully that battery can take it.

I’ve already gone over this mod like a broken record. They are all pretty much the same with differences to the battery, the size, and the color. The DNA30 chip regulates the output by voltage or wattage and ensures a consistent battery output at any charge level. The initial response from the new owners of these Chinese Hana clones have been great. Sure there have been a few issues with some of the mods, but the majority have been well received. When considering the defective models people have received, just consider the amount of these being sold. There are probably thousands of these mods already shipped out so I don’t think they are doing too bad.

The packaging rivals many snack foods.

The packaging rivals many snack foods.

Here is what Fasttech is saying about them:

  • 510 threaded connector
  • Variable Wattage from 7W-30W in .1 watt increment
  • Body is made of anodized aluminum
  • OLED display shows battery charge state, volts and ohms
  • Powered by single 18650 battery (included)
  • Micro-USB charging port
  • Compatible with 0.5ohm~3.3ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 4-8V/10A
  • Random serial number

Available in a rainbow of colors here: http://www.fasttech.com/products/0/10007864/1740402-hana-modz-pack-dna-30-style-mod

 

 

DNA30 DiY Board Clone $27

This is big news. Finally the DiY community can build a DNA30 mod on the cheap. This deal really enables the vaping community to try their ideas at a homemade DNA30 mod. Up until now the DNA30 boards have been very scarce and difficult to acquire. I was able to get one by staying up all night during the release and I’ve fiddled with a box mod, but I had to treat the board like it was an exotic bird. I was too terrified to really try any variation on the design since I wouldn’t be able to replace the board if I fried it. Now I can really test my skill at soldering and compact design, without much conern for the health of the board. This deal is sure to cause a spark of innovation from the vaping community.

Micro USB charging port included!

Micro USB charging port included!

At first glance this looks just like the kit I paid $60 for. It’s got all the same pin outs and the same standard design. This is sure to cause a surge of demand for Hammond project boxes, Altoid tins and NES controllers. When I attempted to build my own box mod I had a very difficult time finding quality components. The preassembled 510 connectors I tried turned out to be junk, niether of the 2 I bought were near the quality of any of my mods. The battery holders available are also rather lackluster, I’m hoping to see new higher quality components hit the market soon. We might even start seeing preassembled boards with customizeable parts, like a DiY essentials kit, that would be nice.

I wonder if it says Hana when it boots...

I wonder if it says Hana when it boots…

Here is what Fasttech is saying about it:

  • Variable Wattage from 7W-30W in .1 watt increment
  • OLED display shows battery charge state, volts and ohms
  • Micro-USB charging port
  • Compatible with 0.5ohm~3.3ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 4-8V/10A

Get yours here: http://www.fasttech.com/products/0/10007864/1735400-hana-modz-pack-dna-30-vw-modules

There is a DNA20 available for $2 less, but don’t bother.

Hana Modz DNA 30 Mini Clone $56

Here is another Hana DNA 30 clone out of china. Good thing this is listed overseas, because Hana has been striking back against the U.S. shops with lawsuits. This is the mini version of the Hana box mod and I’d assume we are going to see more varieties very soon. To date Fasttech has only carried the DNA 20, but for only a few bucks more you can now get the DNA 30 version. This clone has had a lot of buzz surrounding it lately and so far I’ve only heard good things about all the versions.

If you have a DNA 30 any pictures have to be taken at 30 watts.

If you have a DNA 30 any pictures have to be taken at 30 watts.

It isn’t easy being green. Maybe soon we’ll have Kayfuns and RDA’s in all colors. This mod features dual 600mah battery packs built in. There is a common mirco USB charging port for charging. I still can’t get over the fact the Evolv DNA 30 board and charger alone will cost you more than this complete mod. The DNA 30 boards used in these mods boast the same specs as the original. The early adopters have been reporting the performance is indistinguishable from the genuine Hana. The dimensions line up with the original with a small amount of variance, maybe this one is a hair bigger, but it lists as just a few millimeters bigger than the original.

Those buttons make me want to click them

Those buttons make me want to click them

The Hana Modz are the premiere variable wattage box mods available. They have all the options you could wish for. The designs are as compact as they can be. These clones might become my new “go to” recommendation for new vapers. Even sub ohmers will be mildly pleased with these mods which have the ability to fire down to .05 ohms, which is right around my ideal vape. I would still be careful testing the limits of the batteries in these mods, just because the chip allows 30 watts, doesn’t mean the battery is equipped to handle it. I love the recessed 510 connector, this allows for even the most difficult of atomizers to lie nice and flush below the top of the mod. This is sure to be another hit, and I’m looking forward to what varieties we will see in the near future.

Her

Thats a dead ringer for the logo, that is sure to rustle some jimmies

Thats a dead ringer for the logo, that is sure to rustle some jimmies

Here is what the site says about it:

  • 510 threaded connector
  • Variable Wattage from 7W-30W in .1 watt increment
  • Body is made of anodized aluminum
  • OLED display shows battery charge state, volts and ohms
  • Built in 2*600mah Lithium Polymer batteries
  • Micro-USB charging port
  • Compatible with 0.5ohm~3.3ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage: 4-8V
  • Random serial number

Get yours here: http://www.fasttech.com/products/1411/10007864/1722000-hana-modz-pack-dna-30-style-mod