Tag Archives: box mod

DNA30 DiY Board Clone $27

This is big news. Finally the DiY community can build a DNA30 mod on the cheap. This deal really enables the vaping community to try their ideas at a homemade DNA30 mod. Up until now the DNA30 boards have been very scarce and difficult to acquire. I was able to get one by staying up all night during the release and I’ve fiddled with a box mod, but I had to treat the board like it was an exotic bird. I was too terrified to really try any variation on the design since I wouldn’t be able to replace the board if I fried it. Now I can really test my skill at soldering and compact design, without much conern for the health of the board. This deal is sure to cause a spark of innovation from the vaping community.

Micro USB charging port included!

Micro USB charging port included!

At first glance this looks just like the kit I paid $60 for. It’s got all the same pin outs and the same standard design. This is sure to cause a surge of demand for Hammond project boxes, Altoid tins and NES controllers. When I attempted to build my own box mod I had a very difficult time finding quality components. The preassembled 510 connectors I tried turned out to be junk, niether of the 2 I bought were near the quality of any of my mods. The battery holders available are also rather lackluster, I’m hoping to see new higher quality components hit the market soon. We might even start seeing preassembled boards with customizeable parts, like a DiY essentials kit, that would be nice.

I wonder if it says Hana when it boots...

I wonder if it says Hana when it boots…

Here is what Fasttech is saying about it:

  • Variable Wattage from 7W-30W in .1 watt increment
  • OLED display shows battery charge state, volts and ohms
  • Micro-USB charging port
  • Compatible with 0.5ohm~3.3ohm atomizers
  • Input voltage/current: 3.2-4.3V/1.5-7A
  • Output voltage/current: 4-8V/10A

Get yours here: http://www.fasttech.com/products/0/10007864/1735400-hana-modz-pack-dna-30-vw-modules

There is a DNA20 available for $2 less, but don’t bother.

Advertisements

Keep ’em Coming! Cloupor DNA30 Box Mod Clone Preorder $68.95

I guess I’ll resort to posting the same mod multiple times in a day. Although this isn’t listed as a Hana Modz clone, it really is another. At least now we have all kinds of fun colors to make 30 watts of vapor more fun and stylish. I’ve never really cared for box mods, but I guess having 6 colors to choose from (so far) makes switching from tube mods to box mods a little easier. I know this won’t be the last time I list a box DNA mod clone, but I’m pretty sure eventually I’ll break down and buy one.

Well at least it won't get lost in my forest of brass and stainless mods

Well at least it won’t get lost in my forest of brass and stainless mods

This version has no crooked logos. No logo at all. So far there are two makers listed so far, HCigar and Cloupor who are each providing their own renditions. I’m sure the rest of the army of cloners will follow suit and sell their own variation soon enough. This model is the 18650 version. It appears to be a 1:1 replica of the one I listed earlier.

The colors appear to be a slightly different shade in these photos

The colors appear to be a slightly different shade in these photos

Here is what the site is saying about them:

  • Full sized Aluminum body
  • Custom milled display screen with a flush fit to the outside of the box
  • Fits 18650 batteries (not included)
  • Flush 510 connector
  • Flush dome style Fire Button
  • 7 – 30 watts
  • 4 – 8.3 volts
  • 0.4 – 3.0Ω Atomizer Resistance
  • On-board USB charging @500mA
  • LED shows Red while charging and Green when fully charged
  • Micro USB wall charger & USB dust cover included

Get yours here: http://www.whitestagvapor.com/cloupor-black-dna30-mod-pre-order/

The vendor’s ETA for this mod is May 31st, this probably will not be the first DNA clone to arrive.

 

Hana Modz Clone, No Logo DNA 30 Preorder $77.98 Shipped!

Here is a sight to behold. While people are still clambering to get their hands on the new DNA 30 Hana Mod, the cloners are scooping up all the demand and reaching them with a supply of their own. Now there is definitely some information here to be skeptical about, and there are a lot of foggy details surrounding this new release, but this will send a massive shock wave through the vaping community regardless.

This offer will not have logos, but will be a 1:1 replica

This offer will not have logos, but will be a 1:1 replica

The price here is crazy. The original Hana Modz comes in full size or mini for over $260 and flies off the shelf at that price. This is less than one third of that so it will certainly be a hot commodity. This version is going to be available in 5 colors much like the original. Since this is the full size Hana, it has a 2400mah battery and a built in 500mah charger. Everything here looks to be exactly like the original, and skeptics like me will anxiously await a proper review.

Vape the rainbow

Vape the rainbow

There is lots to love about the Hana. They feature a tasteful color selection, a nicely recessed 510 connector, and of course the DNA board. To put the price in perspective, this is cheaper than it would be to actually build your own DNA 30. Hopefully these clones perform as advertised. This is a major development in the clone world bringing the first DNA 30 clone even before there has been an available DNA 20 clone.

Here is what the site is saying about it:

  • Compact size ~ 3.1″ x 2.1″ x 1″ Aluminum body
  • Custom milled display screen with a flush fit to the outside of the box
  • 2400 mAh Li-po
  • Flush 510 connector
  • Flush dome style Fire Button
  • 7 – 30 watts
  • 4 – 8.3 volts
  • 0.4 – 3.0Ω Atomizer Resistance
  • On-board USB charging @500mA
  • LED shows Red while charging and Green when fully charged
  • Micro USB wall charger & USB dust cover included

Get yours here: http://www.vaportekusa.com/hana-modz-clone-dna-30-chip-no-logo-pre-order/ Don’t forget to use coupon code 5off to bring the price down by $4

 

 

Hana V3 Preorder $249, V3 Mini Preorder Same Price

With all the recent buzz about the DNA30 chips being released everyone has been wondering when and where they can get one in a mod. A few lucky people got ZNA mods, but there are also a lot of fans that have been waiting for a new Hana. The Hana Mod has been around for a while and the new updated V3 will be churning out variable wattage up to 30 watts.

They sure are a colorful bunch

They sure are a colorful bunch

I don’t feature many box mods on my site, but when they’re this noteworthy they can’t be ignored. The Hana v3 takes a 18650 battery and gives it quite some flexibility. There is a built in DNA charging board with a micro USB port for charging. Otherwise it is pretty simple in its features which would be standard across the board for most DNA30 devices.

The more classic colors

The more classic colors

The alternative would be to pay $30 and get a ZNA which some vapers might prefer, if they could get one. I see it as the Hana being the mod you can beat on, and the ZNA would get polished and shined regularly. Some of the users who managed to already snag a DNA30 mod have complained about the battery life. I think this might be more of an issue with the Hana Mini which has a built in 1200mah battery. Usually when I think of a box mod I think of it as an all day vape, and I know I wouldn’t make it on 1200mah. The new 2500mah 18650’s might help with the regular Hana.

I wonder a bit about the specs listed from Hana Modz, Evolv states in their datasheet that the DNA30 has a minimum atomizer resistance of .5 Ohms, Hana Modz lists it at .3.

Here is what they say about it:

DNA30 Specs:                          Minimum               Typical                        Max

Output Power                            7 Watts                                                   30 Watts
Output Voltage                          4 Volts                                                     8.3 Volts
Output Current                                                                                         10 Amps
Atomizer Resistance                  .3 Ohms                 1.5 Ohms                3.3 Ohms
Input Voltage                             3.2 Volts                  3.7 Volts                  4.3 Volts
Input Current                             1.5 Amps                 6.0 Amps                7 Amps
Efficiency                                                                   94%

HANA MODZ PACK V3 DIMENSIONS:
LENGTH: 1.94″
WIDTH: 1″
HEIGHT: 3.43″

You can preorder yours here: https://shop.ssvape.com/newest/hana-modz-v3-regular-590.html

You can read the specs from Hana here: http://www.hanamodz.com/pack-v3-specs-1.html

Innokin Itaste MVP 2.0 Starter Kit $35 From USA Vendor

Great for the starter vapers out there

Great for the starter vapers out there

I’ve been accused of ignoring the beginner vapers out there, so this will make up for everything. Here is the Innokin Itaste MVP 2.0 starter kit and this is the best price I’ve seen so far… No its not 101vape. This variable wattage box mod has a very simple design that makes it easy for new vapers to get started on their journey. I personally own a MVP 1.0 that I bought back when I was still new, and it is a great mod. They are durable, easy and are simple to maintain. Most mods require that you buy the mod, then the atomizer, then a battery, and don’t forget a charger… This has it all in a comparably very inexpensive package. This mod features a 2600mah battery, which is really nice capacity for people in need of an all day vape. Another great feature is the charging cable, it can be used to charge a cell phone if needed.

Here are the specs taken from the Innokin website:

Main Features:
  • Variable Voltage: voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.
  • VariableWattage: Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.
  • Ohmsmeter : Reads resistance of your atomizer/cartomizer/clearomizer.
  • Puff Counter:
  • Short Circuit/Atomizer Protection:
  • Over-Discharge Protection:
  • Battery Level Indicator:
  • Large battery capacity:
  • iTaste MVP e-cigarette built-in 2600 mAh polymer Li-Ion rechargeable battery.
  • High compatibility 510 connector:
  • Thread fit iClear10,iClear16 ,iClear30 etc
  • ON/OFF battery switch:
  • 10 seconds cutoff:
  • Passthrough:
  • Remembers last set voltage or wattage :
  • Remembers last set voltage or wattage when the battery is turned off and then back on.
  • Built-in 3 digit display :
  • Digital display shows Ohms meter, Voltage /Wattage setting, number of puffs taken since last time the
  • battery was turned off.
  • Portable power source for electronic products

Get yours for $39.99 and 12% off with coupon code “REDDIT” and free shipping:

http://www.vapingme.com/innokin-itaste-mvp-2-0-vv-vw-510-ego-apv-w-usb-output/

They also have the VTR for $75 and the Kanger Unitank for $9 before coupon. http://www.vapingme.com/sale/